Turnstile Reel Stand
Machine mounted stand for holding reeled coils of material. Rotates 360 degrees for ease of loading. Machine capacity is 3 total.

Reels 15” or 20” ID
Adjustable width reels will accept
11 7/8” or 15” wide material for 5” or 6” gutter. Capacity 1,000lb.

Run Out Stand
Supports gutter as it runs out of machine. Tripod style stands with 1 adjustable leg for leveling and conveyor roller to support gutter. One stand recommend for every 20’ of gutter. Adjustable in height from 31 ½” to 45”.

Transfer Rack
Used to transfer loaded coils from one turnstile reel stand to the other. (1 set / machine needed)

Geared Shear
Mechanically advantaged forward pulling shear for cutting 5” & 6” gutter to length.

Coil Cradle
Used to hold full or partial coils for 5” and 6” gutter. Can be machine or floor mounted. Capacity 700lbs.

Alcoa Hook
Forms a 5/16” hook on the back of the gutter for use with free float hanger system. Also accommodates standard hangers or spike ferrule.

Back Flange 1” and 1 ½”
Forms 1” or 1 ½” flange on back of 5” or 6”gutter eliminating the need for flashing. Used with 5” or 6” machine only.

Back Flange Shear
Mechanically advantaged forward pulling shear for cutting 5” and 6” back flange gutter to length.

12 Volt Electrical System
DC Motor and control to allow operation of machine with 12volt battery. (Battery not included).

Bottom Bead Assembly
Adds unique design to bottom of gutter.